Ubiquiti NanoStation M2

Specifications

HARDWARE VARIANTS

Dimensions and Weight

230 mm x 230 mm x 51 mm (9.06 in. x 9.06 in. x 2.01 in.)

284 mm x 262 mm x 124 mm (11.18 in. x 10.31 in. x 4.88 in.)

Main unit: 1.0 kg (2.20 lbs)
Mounting bracket: 0.1 kg (0.22 lbs)

1.25 kg (2.76 lbs)

Wall/Ceiling-mount (a mounting bracket is delivered with the main unit)

Kensington lock and securing latch

WI-FI RADIO SPECIFICATIONS

Dual-radio and up to four spatial streams:

Radio 1: 2.4 GHz/5 GHz, two spatial streams, 2×2 MU-MIMO

Radio 2: 5 GHz, four spatial streams, 4×4 MU-MIMO

Radio 1: 802.11b/g/n/ax

2.400 GHz to 2.4835 GHz, ISM

Radio 2: 802.11a/n/ac/ax

5.150 GHz to 5.250 GHz, U-NII-1

5.250 GHz to 5.350 GHz, U-NII-2A

5.470 GHz to 5.725 GHz, U-NII-2C

5.725 GHz to 5.850 GHz, U-NII-3/ISM

Note: Available frequency bands may vary with countries or regions. To use the above-mentioned frequency bands, ensure that they are supported in your country or region. For details, see WLAN Country or Region Codes and Channel Compliance.

Data rates

Combined peak data rate: 5.378 Gbps

Radio 1:

2.4 GHz radio

Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to 2SS HE40 802.11ax client devices (maximum)

Two spatial stream Single User (SU) MIMO for up to 287 Mbps wireless data rate to 2SS HE20 802.11ax client devices (typical)

Radio 2:

5 GHz radio

Four spatial stream Single User (SU) MIMO for up to 4.804 Gbps wireless data rate to individual 4SS HE160 802.11ax client devices (maximum)

Two spatial stream Single User (SU) MIMO for up to 1.201 Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (typical)

Four spatial stream Multi User (MU) MIMO for up to 4.804 Gbps wireless data rate to up to four 1SS or two 2SS HE160 802.11ax DL-MU-MIMO capable client devices simultaneously (maximum)

Four spatial stream Multi User (MU) MIMO for up to 2.402 Gbps wireless data rate to up to four 1SS or two 2SS HE80 802.11ax DL-MU-MIMO capable client devices simultaneously (typical)

Data rate set

The following 802.11-compliant data rates in Mbps are supported:

2.4 GHz radio

802.11b: 1, 2, 5.5, 11

802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54

802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)

802.11ax: 8.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)

5 GHz radio

802.11a: 6, 9, 12, 18, 24, 36, 48, 54

02.11n: 6.5 to 600 (MCS0 to MCS31, HT20 to HT40)

802.11ac: 6.5 to 3,467 (MCS0 to MCS9, NSS = 1 to 4, VHT20 to VHT160)

802.11ax: 8.6 to 4,804 (MCS0 to MCS11, NSS = 1 to 4, HE20 to HE160)

Packet aggregation

802.11n/ac/ax: A-MPDU and A-MSDU

Antenna type

Built-in omnidirectional antennas (two 2.4 GHz antennas and four 5 GHz antennas)

Antenna gain

2.4 GHz radio: 27 dBm (24 dBm per chain)

5 GHz radio: 30 dBm (24 dBm per chain)

Maximum transmit power

2.4 GHz radio: 26 dBm (23 dBm per chain)

5 GHz radio: 26 dBm (23 dBm per chain)

Note: The transmit power is limited by local regulatory requirements. For details, see WLAN Country or Region Codes and Channel Compliance.

Thailand

2.400 GHz to 2.4835 GHz, EIRP £ 20 dBm

5.150 GHz to 5.350 GHz, EIRP £ 23 dBm

5.470 GHz to 5.725 GHz. EIRP £ 30 dBm

5.725 GHz to 5.825 GHz, EIRP £ 30 dBm

Power increment

Configurable in increments of 1 dBm

Radio technologies

802.11b: Direct-Sequence Spread-Spectrum (DSSS)

802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)

802.11ax: OFDMA with up to 16 resource units (for an 80 MHz channel)

Modulation types

802.11b: BPSK, QPSK, CCK

802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM

802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM

Bluetooth Radio

Bluetooth 5.1

Integrated vertically polarized omnidirectional antenna

3.5 dBi, with a downtilt angle of roughly 30 degrees

10 dBm (Class 1)

–98 dBm

Port Specifications

1 x 100/1000/2.5G/5GBASE-T port

1 x RJ45 console port (serial console port)

NBASE-T/IEEE802.3bz-compliant 5 Gbps

Auto MDI/MDIX crossover

PoE-PD: 54 V DC (nominal) 802.3af/at/bt (Class 3 or higher)

802.3az EEE

1 x 5GE SFP/RJ45 combo port, compatibility with 1GE and 2.5GE modules

Supplying 48 V/12.95 W power to an IoT unit

USB 3.0 (Type-A connector)

1 x 10/100/1000BASE-T port

1 x multi-color system status LED

1 x Reset button
Press the button for shorter than 2 seconds. Then the device restarts.
Press the button for longer than 5 seconds. Then the device restores to factory settings.

Power Supply and Consumption

Input power supply

The AP supports the following two power supply modes:

54 V DC/1.1 A power input over DC connector: The DC connector accepts 2.1 mm/5.5 mm center-positive circular plug. A DC power adapter needs to be purchased independently.

PoE input over LAN 1: The power source equipment (PSE) complies with IEEE 802.3af standard (PoE).

Note: If both DC power and PoE are available, DC power is preferred.

Overall power consumption

Maximum power consumption: 12.95 W

DC powered: 40 W

PoE powered (802.3af): 12.95 W

PoE+ powered (802.3at): 22 W

PoE++ powered (802.3bt): 40 W

Idle mode: 10.3 W

Environment and Reliability

Temperature

Operating temperature: –10°C to +50°C (14°F to +122°F)

Storage temperature: –40°C to +70°C (–40°F to +158°F)

Note: At an altitude in the range of 3,000–5,000 m (9,842.52–16,404.20 ft.), every time the altitude increases by 220 m (722 ft.), the maximum temperature decreases by 1°C (1.8°F).

Humidity

Operating humidity:   5% RH to 95%  RH (non-condensing)

Storage humidity:       5% RH to 95%  RH (non-condensing)

Mean Time Between Failure (MTBF)

394,941 hours (45 years) at the operating temperature of 25°C (77°F)

Regulatory Compliance

Security regulations

IEC 62368-1
EN 62368-1

EMC regulations

EN 55032
EN 55035
EN IEC 61000-3-2
EN 61000-3-3
EN 301 489-1
EN 301489-3
EN 301489-17

Radio frequency regulations

EN 300 328
EN 301 893
EN 300 440
EN 62311
EN IEC 62311
FCC Part 15

Applicable Software Version

RGOS11.9(6)W3B3 or higher

WLAN

Recommended maximum numberof active devices per AP

150

Maximum number of associated clients

1024  Note: The number of associated clients varies according to the environment.

Maximum number of BSSIDs

32 (up to 16 BSSIDs per radio)

STA management

SSID hiding
Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN
attributes independently.

Remote intelligent perception technology (RIPT)
Intelligent client identification technology
Intelligent load balancing based on the STA quantity or traffic

STA limiting

SSID-based STA limiting
Radio-based STA limiting

Bandwidth limiting

STA/SSID/AP-based rate limiting

Wireless roaming

Layer 2 and Layer 3 roaming

Security

Remote Authentication Dial-In User Service (RADIUS)
PSK, web, 802.1X, PEAP, WPA, WPA2, and WPA3 authentication
SMS authentication (used with the RG-WS series wireless access controller)
MAB authentication (used with the RG-WS series wireless access controller)
WEP (64/128 bits), WPA-Personal, WPA-Enterprise, WPA2-Personal, WPA2-Enterprise, WPA3-Personal (WPA2/WPA3 transition mode), WPA3-Enterprise (CCMP), WPA3-OWE

Allowlist, static blocklist, and dynamic blocklist

User isolation
Rogue AP detection and containment

Dynamic ACL assignment

NFPP:  Supported

CPP:  Supported

Routing and Switching

Static IPv4 address and DHCP-assigned
IPv4 address
NAT
FTP ALG
DNS ALG

Multicast-to-unicast conversion

IPv6 addressing
Neighbor Discovery (ND)
ICMPv6
IPv6 ping
IPv6 DHCP Client

IPv4/IPv6 static routing

PPPoE Client
IPsec VPN, up to five IPsec tunnels

Management

Network management

Fault inspection and alarm
Information statistics and logging
SNMPv1/v2c/v3
NTP Server and NTP Client

Network management platform

Ruijie Cloud
Web-based management (Eweb)

User access management

Console, Telnet, SSH, SNMP and TFTP-based management

Fat/Fit/Cloud mode switchover

When the AP works in Fit mode, it can be switched to Fat mode through an AC.
When the AP works in Fat mode, it can be switched to Fit mode through the console port or Telnet.
When the AP works in Cloud mode, it can be managed through Ruijie Cloud.

Ordering Information

Wi-Fi 6 dual-radio indoor wireless access point
2.4 GHz 2×2:2 MU-MIMO + 5 GHz 4×4:4 MU-MIMO
Built-in omnidirectional antennas Up to six spatial streams
Data rate of up to 5.378 Gbps
Compliance with IEEE 802.11a/b/g/n/ac and 802.11ax standards
Fat/Fit/cloud mode switchover
Compliance with IEEE 802.3 bt/at/af PoE standard
Each AP occupying one wireless access controller license

Package Contents

Main unit: 1

Mounting bracket: 1

4.2 mm x 20 mm Phillips pan head self-tapping screw: 4

Wall anchor: 4

Warranty Card and Hazardous Substance Table: 1

Quick Start Guide : 1