Ruijie RG-AP820-L Access Point

Specifications

HARDWARE VARIANTS

Dimensions and Weight

153 mm x 193 mm x 26 mm (6.02 in. x 7.60 in. x 1.02 in.)

377 mm x 322 mm x 228 mm (14.84 in. x 12.68 in. x 8.98 in.)

Main unit: 0.42 kg (0.93 lbs)
Mounting bracket: 0.07 kg (0.15 lbs)

5.75 kg (12.68 lbs)

Wall/Ceiling-mount (A mounting bracket is delivered with the main unit)

Color : White

Securing latch and Kensington lock

WI-FI RADIO SPECIFICATIONS

Dual-radio and up to four spatial streams:

Radio 1: 2.4 GHz/5 GHz, two spatial streams, 2×2 MU-MIMO

Radio 2: 5 GHz, two spatial streams, 2×2 MU-MIMO

Radio 1: 802.11b/g/n/ax

2.400 GHz to 2.4835 GHz, ISM, channels 1 to 13 802.11a/n/ac/ax:

5.150 GHz to 5.250 GHz, U-NII-1, channels 36, 40, 44, and 48

5.250 GHz to 5.350 GHz, U-NII-2A, channels 52, 56, 60, and 64

5.470 GHz to 5.725 GHz, U-NII-2C, channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, and 140

5.725 GHz to 5.850 GHz, U-NII-3/ISM, channels 149, 153, 157, 161, and 165

Radio 2: 802.11a/n/ac/ax

5.150 GHz to 5.250 GHz, U-NII-1 , channels 36, 40, 44, and 48

5.250 GHz to 5.350 GHz, U-NII-2A, channels 52, 56, 60, and 64

5.470 GHz to 5.725 GHz, U-NII-2C, channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, and 140

5.725 GHz to 5.850 GHz, U-NII-3/ISM, channels 149, 153, 157, 161, and 165

Note: Available frequency bands may vary with countries or regions. To use the above-mentioned frequency bands, ensure that they are supported in your country or region. For details, see WLAN Country or Region Codes and Channel Compliance.

Data rates

Combined peak data rate: 1.775 Gbps

Radio 1:

2.4 GHz radio

Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client devices (maximum)

Two spatial stream Single User (SU) MIMO for up to 287 Mbps wireless data rate to individual 2SS HE20 802.11ax client devices (typical)

Radio 2:

5 GHz radio

Two spatial stream Single User (SU) MIMO for up to 1.201 Gbps wireless data rate to 2SS HE80
802.11ax client devices (typical)

Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client device (typical)

Two spatial stream Multi-User (MU) MIMO for up to 1.201 Gbps wireless data rate to up to two 1SS HE80 802.11ax DL-MU-MIMO capable client devices simultaneously (maximum)

Two spatial stream Multi-User (MU) MIMO for up to 574 Mbps wireless data rate to up to two 1SS HE40 802.11ax DL-MU-MIMO capable client devices simultaneously (typical)

Data rate set

The following 802.11-compliant data rates in Mbps are supported:

2.4 GHz radio

802.11b: 1, 2, 5.5, 11

802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54

802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)

802.11ax: 8.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)

5 GHz radio

802.11a: 6, 9, 12, 18, 24, 36, 48, 54

802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)

802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT80)

802.11ax: 8.6 to 1,201 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE80)

Packet aggregation

802.11n/ac/ax: A-MPDU and A-MSDU

Antenna type

Built-in omnidirectional antennas
2 x 2.4 GHz antennas (Radio 1)
4 x 5 GHz antennas (Radio 1 & Radio 2)

Antenna gain

2.4 GHz radio: 2 dBi

5 GHz radio: 4 dBi

Maximum transmit power

2.4 GHz radio: 26 dBm (23 dBm per chain)

5 GHz radio: 26 dBm (23 dBm per chain)

Note: The transmit power is limited by local regulatory requirements. For details, see WLAN Country or Region Codes and Channel Compliance.

Thailand

2.400 GHz to 2.4835 GHz, EIRP £ 20 dBm

5.150 GHz to 5.350 GHz, EIRP £ 23 dBm

5.470 GHz to 5.725 GHz. EIRP £ 30 dBm

5.725 GHz to 5.825 GHz, EIRP £ 30 dBm

Power increment

Configurable based on requirement

Radio technologies

802.11b: Direct-Sequence Spread-Spectrum (DSSS)

802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)

802.11ax: Orthogonal Frequency Division Multiple Access (OFDMA)

Modulation types

802.11b: BPSK, QPSK, CCK

802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM

802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM

Bluetooth Radio

Bluetooth 5.1

1 x onboard built-in omnidirectional antenna

2.4 dBi, with a downtilt angle of roughly 30 degrees

17 dBm (GFSK)
14 dBm (π/4-DQPSK, 8-DPSK)

–95.5 dBm (DH5)
–95 dBm (π/4-DQPSK)
–87.5 dBm (8-DPSK)

Ports Specifications

1 x 10/100/1000BASE-T port

1 x RJ45 console port (serial console port)

In compliance with IEEE 802.3af standard (PoE)

Auto MDI/MDIX crossover

PoE-PD: 54 V DC (nominal) 802.3af/at/bt (Class 3 or higher)

802.3az EEE

1 x multi-color system status LED

1 x Reset button
Press the button for shorter than 2 seconds. Then the device restarts.
Press the button for longer than 5 seconds. Then the device restores to factory settings.

Power Supply and Consumption

Input power supply

The AP supports the following two power supply modes:

48 V DC/0.3 A power input over DC connector: The DC connector accepts 2.1 mm/5.5 mm center-positive circular plug. A DC power adapter needs to be purchased separately.

PoE input over LAN 1: The power source equipment (PSE) complies with IEEE 802.3af standard (PoE).

Note: If both DC power and PoE are available, DC power is preferred.

Overall power consumption

Maximum power consumption: 12.95 W

DC powered: 12.95 W

PoE powered (802.3af): 12.95 W

PoE+ powered (802.3at): 12.95 W

PoE++ powered (802.3bt): 12.95 W

Idle mode: 6.0 W

Environment and Reliability

Temperature

Operating temperature: –10°C to +50°C (14°F to +122°F)

Storage temperature: –40°C to +70°C (–40°F to +158°F)

Note: At an altitude in the range of 3,000–5,000 m (9,842.52–16,404.20 ft.), every time the altitude increases by 220 m (722 ft.), the maximum temperature decreases by 1°C (1.8°F).

Humidity

Operating humidity:   5% RH to 95%  RH (non-condensing)

Storage humidity:       5% RH to 95%  RH (non-condensing)

Mean Time Between Failure (MTBF)

200,000 hours (22 years) at the operating temperature of 25°C (77°F)

Regulatory Compliance

Security regulations

IEC 62368-1
EN 62368-1

EMC regulations

EN 55032
EN 55035
EN IEC 61000-3-2
EN 61000-3-3
EN 301 489-1
EN 301489-3
EN 301489-17

Radio frequency regulations

EN 300 328
EN 301 893
EN 300 440
EN 62311
EN IEC 62311
EN 50665:2017
FCC Part 15

Applicable Software Version

AP_RGOS 11.9(6)W1B4 or higher

WLAN

Recommended maximum numberof active devices per AP

64 (for HD Video)/120 (for general usage)

Maximum number of associated clients

256   Note: The number of associated clients varies according to the environment.

Maximum number of BSSIDs

32 (up to 16 BSSIDs per radio)

STA management

SSID hiding
Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN
attributes independently.
Remote intelligent perception technology (RIPT)
Intelligent client identification technology
Intelligent load balancing based on the STA quantity or traffic

STA limiting

SSID-based STA limiting
Radio-based STA limiting

Bandwidth limiting

STA/SSID/AP-based rate limiting

Wireless roaming

Layer 2 and Layer 3 roaming

Security

Remote Authentication Dial-In User Service (RADIUS)
PSK, web, 802.1X, PEAP, WPA, WPA2, and WPA3 authentication
SMS authentication (used with the RG-WS series wireless access controller)
MAB authentication (used with the RG-WS series wireless access controller)
WEP (64/128 bits), WPA-Personal, WPA-Enterprise, WPA2-Personal, WPA2-Enterprise, WPA3-Personal (WPA2/WPA3 transition mode), WPA3-Enterprise (CCMP), WPA3-OWE

Allowlist, static blocklist, and dynamic blocklist

Dynamic ACL assignment
ACL assignment based on time spans
ACL assignment (complete entry) based on MAC addresses
Execution of pre-configured ACLs (entry index) based on MAC addresses

NFPP:  Supported

CPP:  Supported

Routing and Switching

Static IPv4 address and DHCP-assigned
IPv4 address
DHCP Snooping
Option 82
DHCP Server
DHCP Client

Multicast-to-unicast conversion

IPv6 addressing
Neighbor Discovery (ND)
ICMPv6
IPv6 ping
IPv6 DHCP Client

IPv4/IPv6 static routing

PPPoE Client
IPsec VPN, up to five IPsec tunnels

Management

Network management

Fault inspection and alarm
Information statistics and logging
SNMPv1/v2c/v3
NTP Server and NTP Client

Network management platform

Ruijie Cloud
Web-based management (Eweb)

User access management

Console, Telnet, SSH, SNMP and TFTP-based management

Fat/Fit/Cloud mode switchover

When the AP works in Fit mode, it can be switched to Fat mode through an AC.
When the AP works in Fat mode, it can be switched to Fit mode through the console port or Telnet.
When the AP works in Cloud mode, it can be managed through Ruijie Cloud.

Ordering Information

Wi-Fi 6 (802.11ax) dual-radio indoor wireless access point Up to four spatial streams
Data rate of up to 1.775 Gbps
1 x 10/100/1000Base-T uplink port, supporting PoE and DC power supply
Bundled with Ruijie Cloud Service lifetime license (The PoE injector is sold separately, which could be purchased from Ruijie. The DC power adapter should be purchased from a third-party vendor separately if needed.)

1-port PoE injector (1000BASE-T, IEEE 802.3af-compliant)

Package Contents

Main unit: 1

Mounting bracket: 1

M4 x 20 mm screw: 4

Wall anchor: 2

Warranty Card: 1

Quick Start Guide : 1