Ruijie RG-AP720-L Access Point

Specifications

HARDWARE VARIANTS

Dimensions and Weight

194 mm x 194 mm x 37 mm (7.64 in. x 7.64 in. x 1.46 in.)

463 mm x 370 mm x 240 mm (18.23 in. x 14.57 in. x 9.45 in.)

Main unit: 0.42 kg (0.93 lbs)
Mounting bracket: 0.07 kg (0.15 lbs)

7.31 kg (16.12 lbs)

Wall/Ceiling-mount (a mounting bracket is delivered with the main unit)

Kensington lock and securing latch

WI-FI RADIO SPECIFICATIONS

Dual-radio and up to four spatial streams:

Radio 1: 2.4 GHz/5 GHz, two spatial streams, 2×2 MU-MIMO

Radio 2: 5 GHz, two spatial streams, 2×2 MU-MIMO

Radio 1: 802.11b/g/n/ax

2.400 GHz to 2.4835 GHz, ISM

Radio 2: 802.11a/n/ac/ax

5.150 GHz to 5.250 GHz, U-NII-1

5.250 GHz to 5.350 GHz, U-NII-2A

5.470 GHz to 5.725 GHz, U-NII-2C

5.725 GHz to 5.850 GHz, U-NII-3/ISM

Note: Available frequency bands may vary with countries or regions. To use the above-mentioned frequency bands, ensure that they are supported in your country or region. For details, see WLAN Country or Region Codes and Channel Compliance.

Data rates

Combined peak data rate: 1.167 Gbps

Radio 1:

2.4 GHz radio

Two spatial stream Single User (SU) MIMO for up to 300 Mbps wireless data rate to individual 2SS HT40 802.11n client devices (maximum)

Two spatial stream Single User (SU) MIMO for up to 144.4 Mbps wireless data rate to individual 2SS HT20 802.11n client devices (typical)

Radio 2:

5 GHz radio

Two spatial stream Single User (SU) MIMO for up to 867 Mbps wireless data rate to individual 2SS HT80 802.11ac client devices (typical)

Data rate set

The following 802.11-compliant data rates in Mbps are supported:

2.4 GHz radio

802.11b: 1, 2, 5.5, 11

802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54

802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)

5 GHz radio

802.11a: 6, 9, 12, 18, 24, 36, 48, 54

802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)

802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT80)

Packet aggregation

802.11n/ac: A-MPDU and A-MSDU

Antenna type

Built-in omnidirectional antennas (two 2.4 GHz antennas and two 5 GHz antennas)

Antenna gain

2.4 GHz radio: 4.5 dBi

5 GHz radio: 5.7 dBi

Maximum transmit power

2.4 GHz radio: 26 dBm (23 dBm per chain)

5 GHz radio: 26 dBm (23 dBm per chain)

Note: The transmit power is limited by local regulatory requirements. For details, see WLAN Country or Region Codes and Channel Compliance.

Thailand

2.400 GHz to 2.4835 GHz, EIRP £ 20 dBm

5.150 GHz to 5.350 GHz, EIRP £ 23 dBm

5.470 GHz to 5.725 GHz. EIRP £ 30 dBm

5.725 GHz to 5.825 GHz, EIRP £ 30 dBm

Radio technologies

802.11b: Direct-Sequence Spread-Spectrum (DSSS)

802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)

Modulation types

802.11b: BPSK, QPSK, CCK

802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM

802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

Ports Specifications

1 x 10/100/1000BASE-T port

1 x RJ45 console port (serial console port)

In compliance with IEEE 802.3af standard (PoE)

Auto MDI/MDIX crossover

PoE-PD: 54 V DC (nominal) 802.3af/at/bt (Class 3 or higher)

802.3az EEE

1 x multi-color system status LED

1 x Reset button
Press the button for shorter than 2 seconds. Then the device restarts.
Press the button for longer than 5 seconds. Then the device restores to factory settings.

Power Supply and Consumption

The AP supports the following two power supply modes:

12 V DC/1.5 A power input over DC connector: The DC connector accepts 2.1 mm/5.5 mm center-positive circular plug. A DC power adapter needs to be purchased separately.

PoE input over LAN 1: The power source equipment (PSE) complies with IEEE 802.3af standard (PoE).

Note: If both DC power and PoE are available, DC power is preferred.

Maximum power consumption: 12.95 W

DC powered: 12.95 W

PoE powered (802.3af): 12.95 W

PoE+ powered (802.3at): 12.95 W

PoE++ powered (802.3bt): 12.95 W

Idle mode: 6.0 W

Environment and Reliability

Temperature

Operating temperature: –10°C to +50°C (14°F to +122°F)

Storage temperature: –40°C to +70°C (–40°F to +158°F)

Note: At an altitude in the range of 3,000–5,000 m (9,842.52–16,404.20 ft.), every time the altitude increases by 220 m (722 ft.), the maximum temperature decreases by 1°C (1.8°F).

Humidity

Operating humidity:   5% RH to 95%  RH (non-condensing)

Storage humidity:       5% RH to 95%  RH (non-condensing)

Mean Time Between Failure (MTBF)

200,000 hours (22 years) at the operating temperature of 25°C (77°F)

Regulatory Compliance

Security regulations

IEC 62368-1
EN 62368-1

EMC regulations

EN 55032
EN 55035
EN IEC 61000-3-2
EN 61000-3-3
EN 301 489-1
EN 301489-3
EN 301489-17

Radio frequency regulations

EN 300 328
EN 301 893
EN 300 440
EN 62311
EN IEC 62311
EN 50665:2017
FCC Part 15

Applicable Software Version

RGOS 11.1(9)B1P30 or higher

WLAN

64

256   Note: The number of associated clients varies according to the environment.

32 (up to 16 BSSIDs per radio)

SSID hiding
Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN
attributes independently.
Remote intelligent perception technology (RIPT)
Intelligent client identification technology
Intelligent load balancing based on the STA quantity or traffic

SSID-based STA limiting
Radio-based STA limiting

STA/SSID/AP-based rate limiting

Layer 2 and Layer 3 roaming

Security

Remote Authentication Dial-In User Service (RADIUS)
PSK, web, 802.1X and MSCHAPv2 authentication
SMS authentication (used with the RG-WS series wireless access controller)
MAB authentication (used with the RG-WS series wireless access controller)
WPA (TKIP), WPA-PSK, WPA2, WEP (64/128-bit)

Allowlist, static blocklist, and dynamic blocklist

Dynamic ACL assignment based on 802.1X authentication (used with the AC)

NFPP:  Supported

CPP:  Supported

Routing and Switching

Static IPv4 address
IPv4 DHCP client
FTP ALG
DNS ALG

Multicast
Multicast-to-unicast conversion

IPv6 addressing
Neighbor Discovery (ND)
ICMPv6
IPv6 ping
IPv6 Tracert

IPv4/IPv6 static routing

PPPoE client

Management

Network management

Fault inspection and alarm
Information statistics and logging
SNMPv1/v2c/v3
NTP Server and NTP Client

Network management platform

Ruijie Cloud
Web-based management (Eweb)

User access management

Console, Telnet, SSH, SNMP and TFTP-based management

Fat/Fit/Cloud mode switchover

When the AP works in Fit mode, it can be switched to Fat mode through an AC.
When the AP works in Fat mode, it can be switched to Fit mode through the console port or Telnet.
When the AP works in Cloud mode, it can be managed through Ruijie Cloud.

Ordering Information

Dual-radio indoor wireless access point
Data rate of up to 1,167 Mbps
Compliance with IEEE 802.11a/b/g/n and 802.11ac Wave2 standards
Fat/Fit/Cloud mode switchover
One uplink electrical port
IEEE 802.3af-compliant (PoE) power supply and DC power supply

Package Contents

Main unit: 1

Mounting bracket: 1

Key to the securing latch: 1

Wall anchor: 4

Cross recessed pan head self-tapping screw: 4

Warranty Card and Hazardous Substance Table: 1

Quick Start Guide : 1