Ruijie RG-AP680-L Outdoor Access Point

Specifications

HARDWARE VARIANTS

Dimensions and Weight

251 mm x 168 mm x 64 mm (9.88 in. x 6.61 in. x 2.52 in.)

415 mm x 242 mm x 337 mm (16.34 in. x 9.53 in. x 13.27 in.)

Main unit: 1.12 kg (2.47 lbs)
Mounting bracket: 0.9 kg (1.98 lbs)

6.43 kg (14.18 lbs)

Ceiling/Pole-mount (a mounting bracket is delivered with the main unit)

WI-FI RADIO SPECIFICATIONS

Dual-radio and up to four spatial streams:

Radio 1: 2.4 GHz/5 GHz, two spatial streams, 2×2 MU-MIMO

Radio 2: 5 GHz, two spatial streams, 2×2 MU-MIMO

Radio 1: 802.11b/g/n/ax

2.400 GHz to 2.4835 GHz, channels 1 to 13

Radio 2: 802.11a/n/ac/ax

5.150 GHz to 5.250 GHz, U-NII-1, channels 36, 40, 44, and 48

5.250 GHz to 5.350 GHz, U-NII-2A, channels 52, 56, 60, and 64

5.470 GHz to 5.725 GHz, U-NII-2C, channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, and 140

5.725 GHz to 5.850 GHz, U-NII-3/ISM, channels 149, 153, 157, 161, and 165

Note: Available frequency bands may vary with countries or regions. To use the above-mentioned frequency bands, ensure that they are supported in your country or region. For details, see WLAN Country or Region Codes and Channel Compliance.

Data rates

Combined peak data rate: 2.976 Gbps

Radio 1:

2.4 GHz: 574 Mbps

Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client devices (max)

Two spatial stream Single User (SU) MIMO for up to 287 Mbps wireless data rate to individual 2SS HE20 802.11ax client devices (typical)

Radio 2:

5 GHz: 2.402 Gbps

Two spatial stream Single User (SU) MIMO for up to 2.402 Gbps wireless data rate to individual 2SS HE160 802.11ax client devices (maximum)

Two spatial stream Single User (SU) MIMO for up to 1.201 Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (typical)

Two spatial stream Multi-User (MU) MIMO for up to 2.402 Gbps wireless data rate to up to two 1SS HE160 802.11ax DL-MU-MIMO capable client devices simultaneously (maximum)

Two spatial stream Multi-User (MU) MIMO for up to 1.201 Gbps wireless data rate to up to two 1SS
HE80 802.11ax DL-MU-MIMO capable client devices simultaneously (typical)

Data rate set

The following 802.11-compliant data rates in Mbps are supported:

2.4 GHz radio

802.11b: 1, 2, 5.5, 11

802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54

802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)

802.11ac: 6.5 to 400 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT40)

802.11ax: 8.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)

5 GHz radio

802.11a: 6, 9, 12, 18, 24, 36, 48, 54

802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)

802.11ac: 6.5 to 1733 (MCS0 to MCS9, NSS = 1 to 2,VHT20 to VHT160)

802.11ax: 8.6 to 2,402 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE160)

Packet aggregation

802.11n/ac/ax: A-MPDU and A-MSDU

Antenna type

Built-in omnidirectional antennas (two 2.4 GHz antennas and two 5 GHz antennas)

Antenna gain

2.4 GHz radio: 3.5 dBi

5 GHz radio: 5.5 dBi

Maximum transmit power

2.4 GHz radio: 28 dBm (25 dBm per chain)

5 GHz radio: 28 dBm (25 dBm per chain)

Note: The transmit power is limited by local regulatory requirements. For details, see WLAN Country or Region Codes and Channel Compliance.

Thailand

2.400 GHz to 2.4835 GHz: 20 dBm

5.470 GHz to 5.725 GHz: 30 dBm

5.725 GHz to 5.825 GHz: 30 dBm

Power increment

Configurable in increments of 1 dBm

Radio technologies

802.11b: Direct-Sequence Spread-Spectrum (DSSS)

802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)

802.11ax: Orthogonal Frequency Division Multiple Access (OFDMA)

Modulation types

802.11b: BPSK, QPSK, CCK

802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM

802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM

Bluetooth Radio

Bluetooth 5.0    – iBeacon Bluetooth, applied to Bluetooth locating and Bluetooth applications

Integrated omnidirectional antenna

5 dBi

10 dBm

-88 dBm (@BLE)

Ports Specifications

1 x 10/100/1000BASE-T port, supporting PoE input 1 x 1GE SFP port

1 x RJ45 console port (serial console port)

1 x multi-color system status LED
3 x single-color RSSI LEDs

1 x Reset button
Press the button for shorter than 2 seconds. Then the device restarts.
Press the button for longer than 5 seconds. Then the device restores to factory settings.

Power Supply and Consumption

The AP supports the following two power supply modes:

48 V DC/0.35 A power input over DC connector: The DC connector accepts 2.0 mm/6.3 mm center- positive circular plug. A DC power adapter needs to be purchased independently.

PoE input over ETH/PoE: The power source equipment (PSE) complies with IEEE 802.3af/at standard (PoE/PoE+).

Note: If both DC power and PoE are available, DC power is preferred.

Maximum power consumption: 12.95 W

DC powered: 12.95 W

PoE powered (802.3af): 12.95 W

PoE+ powered (802.3at): 12.95 W

PoE++ powered (802.3bt): 12.95 W

Idle mode: 6.0 W

Environment and Reliability

Temperature

Operating temperature:   –40°C to +65°C (–40°F to +149°F)

Storage temperature:       –40°C to +85°C (–40°F to +185°F)

Note: At an altitude in the range of 3,000–5,000 m (9,842.52–16,404.20 ft.), every time the altitude increases by 220 m (722 ft.), the maximum temperature decreases by 1°C (1.8°F).

Humidity

Operating humidity:   0% RH to 100% RH (non-condensing)

Storage humidity:       0% RH to 100% RH (non-condensing)

IP rating

IP68

Mean Time Between Failure (MTBF)

>250,000 hours

Regulatory Compliance

Security regulations

IEC 62368-1
EN 62368-1
EN 60950-22

EMC regulations

EN 55032
EN 55035
EN IEC 61000-3-2
EN 61000-3-3
EN 301 489-1
EN 301489-3
EN 301489-17

Radio frequency regulations

EN 300 328
EN 301 893
EN 300 440
EN 62311
EN IEC 62311
EN 50665
FCC Part 15

Applicable Software Version

RGOS11.9(6)W3B3 or later

WLAN

120

1024   Note: The number of associated clients varies according to the environment.

32 (up to 16 BSSIDs per radio)

SSID hiding
Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN attributes independently.
Remote intelligent perception technology (RIPT)
Intelligent client identification technology
Intelligent load balancing based on the STA quantity or traffic

SSID-based STA limiting
Radio-based STA limiting

STA/SSID/AP-based rate limiting

Layer 2 and Layer 3 roaming

Security

Remote Authentication Dial-In User Service (RADIUS)
PSK, web, 802.1X, WPA, WPA2, and WPA3 authentication
SMS authentication (used with the RG-WS series wireless access controller) MAB authentication (used with the RG-WS series wireless access controller)
WEP (64/128 bits), WPA-Personal, WPA-Enterprise, WPA2-Personal, WPA2-Enterprise, WPA3-Personal (WPA2/WPA3 transition mode), WPA3-Enterprise (CCMP), WPA3-OWE

Allowlist, static blocklist, and dynamic blocklist

Dynamic ACL assignment

NFPP:  Supported

CPP:  Supported

Routing and Switching

Static IPv4 address
IPv4 DHCP client
NAT FTP ALG
NAT DNS ALG

Multicast-to-unicast conversion

IPv6 addressing
Neighbor Discovery (ND)
ICMPv6
IPv6 ping
IPv6 DHCP client

IPv4/IPv6 static routing

PPPoE client
IPsec VPN

Management

Network management

Fault inspection and alarm
Information statistics and logging
SNMPv1/v2c/v3
NTP Server and NTP Client

Network management platform

Ruijie Cloud
Web-based management (Eweb)

User access management

Console, Telnet, SSH, SNMP and TFTP-based management

Fat/Fit/Cloud mode switchover

When the AP works in Fit mode, it can be switched to Fat mode through an AC.
When the AP works in Fat mode, it can be switched to Fit mode through the console port or Telnet.
When the AP works in Cloud mode, it can be managed through Ruijie Cloud.

Ordering Information

Wi-Fi 6 dual-radio wireless access point
Compliance with IEEE 802.11a/b/g/n/ac
802.11ax standards Built-in omnidirectional antennas
Up to four spatial streams
Data rate of up to 2.976 Gbps
Fat/Fit/Cloud mode switchover
Electrical and optical uplink ports
IEEE 802.3af/at-compliant (PoE/PoE+) power supply
DC power supply (48 V/0.35 A)

Package Contents

Mounting plate assembly: 1

Celling/Pole-mount bracket: 1

M5 machine screw: 4

M8  machine screw: 2

M6 x 50 mm expansion anchor: 4

Watertight cable gland for the Ethernet cable and power cord: 2

Watertight cable gland for the optical cable: 1

Grounding cable: 1

Dust cap: 3

Warranty Card  : 1