Ruijie RG-AP210-L Access Point

Specifications

Radio

RF

2.4GHz (in operational band 2.412GHz to 2.472GH)

RF Standard

EN 300328

Transmission Protocol

802.11b/g/n

Spatial Streams

2 streams, 2 x 2 MIMO

Access Rates

Up to 300Mbps

Maximum Transmit Power

≤20dBm (Adjustable)

Flash

32MB

Dimensions (W x D x H)

175mm x 175mm x 38mm (6.9in x 6.9in x 1.5in)

Weight

0.35kg

Ports and Button

One 10/100BASE-T Ethernet port (PoE-capable)
One DC port
One Reset button

Reset

Supported

LED Indicators

Supported

Power Supply

IEEE 802.af/at PoE
Local power supply

Antenna

Built-in omnidirectional, antenna gain: 3dBi

Power Consumption

＜7.5W

IP Rating

IP41

Temperature

Operating: -10℃ to 45℃ (14℉ to 113℉)

Storage: -40℃ to 60℃ (-40℉ to 140℉)

Humidity

Operating: 5% to 95% (non-condensing)

Storage: 5% to 95% (non-condensing)

MTBF

>250,000H

EMC Standard

GB9254
EN301 489
EN 55032
EN 61000
EN 55035

LED Indicators

Fit AP

State

Frequency

Meaning

Off

N/A

The AP is NOT receiving power.

Blinking green

3Hz

Initialization in progress

Blinking red

3Hz

Initialization is complete, but no Ethernet activity.

Blinking blue

3Hz

Initialization is complete, the wired port is connected and the AP is establishing a CAPWAP connection with an AC.

Solid blue

N/A

Normal operation, but no wireless clients are associated with the AP.

Solid green

N/A

Normal operation, at least one wireless client is
associated with the AP.

Reset (Fit/Fat switchover)

Pressed for 2s or less

The AP is rebooted.

Pressed for 3s or more

Factory settings are restored.

Fat AP

State

Frequency

Meaning

Off

N/A

The AP is NOT receiving power.

Blinking green

3Hz

Initialization in progress

Blinking red

3Hz

Initialization is complete, but no Ethernet activity.

Solid blue

N/A

Normal operation, but no wireless clients are associated with the AP.

Solid green

N/A

Normal operation, at least one wireless client is
associated with the AP.

Reset (Fit/Fat switchover)

Pressed for 2s or less

The AP is rebooted.

Pressed for 3s or more

Factory settings are restored.

Temperature

-10ºC to 45ºC (14ºF to 113ºF)

Relative Humidity

5% to 95%

Maximum diameter (μm)

0.5
1
3
5

Maximum concentration (Particles/m3)

1.4 x 107
7 x 105
2.4 x 105
1.3 x 105

Gas

Average (mg/m3)

Maximum (mg/m3)

SO2

0.2

1.5

H2S

0.006

0.03

NO2

0.04

0.15

NH3

0.05

0.15

Cl2

0.01

0.3

Power Supply

Internal Diameter

2.10+/-0.05mm

External Diameter

5.50+/-0.05mm

Depth

9mm

Conductor Resistance

5Ω

Insulation Resistance

100MΩ

Withstand Voltage

1,000V

Polarity

Internal: positive

External: negative

Installation Tools

Common Tools

Phillips screwdriver, related copper and fiber cables, bolts, diagonal pliers, cable ties

Special Tools

Wire stripper, crimping pliers, RJ-45 crimping pliers, punch down tool

Meter

Multimeter, bit error rate tester (BERT)

Unpacking the Access Point

Package Contents Items

Verify that all parts are installed and debugged.Screws Mounting brackets Product quick installation guide Packing list