Ruijie RG-AP180 Access Point

Specifications

Model RG-RAP2260(G)

Wi-Fi Radio

Dual-radio and up to four spatial streams:
Radio 1: 2.4 GHz, two spatial streams, 2×2 MU-MIMO
Radio 2: 5 GHz, two spatial streams, 2×2 MU-MIMO

Radio 1: 802.11b/g/n/ax
2.400 GHz to 2.4835 GHz, ISM, channels 1 to 13
Radio 2: 802.11a/n/ac/ax
5.150 GHz to 5.250 GHz, U-NII-1, channels 36, 40, 44, and 48
5.250 GHz to 5.350 GHz, U-NII-2A, channels 52, 56, 60, and 64
5.470 GHz to 5.725 GHz, U-NII-2C, channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, and 140
5.725 GHz to 5.850 GHz, U-NII-3/ISM, channels 149, 153, 157, 161, and 165

Combined peak data rate: 1.775 Gbps Radio 1: 2.4 GHz, 574 Mbps
Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client devices (maximum)
Two spatial stream Single User (SU) MIMO for up to 287 Mbps wireless data rate to individual 2SS HE20 802.11ax client devices (typical)
Radio 2: 5 GHz, 1.201 Gbps
Two spatial stream Single User (SU) MIMO for up to 1.201 Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (maximum)
Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client devices (typical)
Two spatial stream Multi-User (MU) MIMO for up to 1.201 Gbps wireless data rate to up to two 1SS HE80 802.11ax DL-MU-MIMO capable client devices simultaneously (maximum)
Two spatial stream Multi-User (MU) MIMO for up to 574 Mbps wireless data rate to up to two 1SS HE40
802.11ax DL-MU-MIMO capable client devices simultaneously (typical)

Data rate set

The following 802.11-compliant data rates in Mbps are supported:
2.4 GHz radio
802.11b: 1, 2, 5.5, 11
802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54
802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)
802.11ac: 6.5 to 400 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT40)
802.11ax: 8.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)
5 GHz radio
802.11a: 6, 9, 12, 18, 24, 36, 48, 54
802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)
802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT80)
802.11ax: 8.6 to 1,201 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE80)

Packet aggregation

802.11n/ac/ax: A-MPDU and A-MSDU

Antenna type

Built-in intelligent antennas (two 2.4 GHz antennas and two 5 GHz antennas)

Antenna gain

5 GHz Antenna Gain

5.5 dBi

2.4 GHz Antenna Gain

2.5 dBi

Maximum transmit power

5 GHz

Auto/20/40/80 MHz

2.4 GHz

Auto/20/40 MHz

Thailand
2.400 GHz to 2.4835 GHz, EIRP £ 20 dBm
5.150 GHz to 5.350 GHz, EIRP £ 23 dBm
5.470 GHz to 5.725 GHz. EIRP £ 30 dBm
5.725 GHz to 5.825 GHz, EIRP £ 30 dBm

Power increment

Configurable in increments of 1 dBm

Radio technologies

802.11b: Direct-Sequence Spread-Spectrum (DSSS)
802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)
802.11ax: Orthogonal Frequency Division Multiple Access (OFDMA)

Modulation types

802.11b: BPSK, QPSK, CCK
802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM

Wi-Fi Radio FrequencyPerformance

5 GHz

802.11a
802.11n (HT20)
802.11n (HT40)
802.11ac (VHT20)
802.11ac (VHT40)
802.11ac (VHT80)
802.11ax (HE20)
802.11ax (HE40)
802.11ax (HE80)

2.4 GHz

 802.11n (HT20)
 802.11n (HT40)
 802.11ax (HE20)
 802.11ax (HE40)

Bluetooth Radio

Bluetooth 5.0

Onboard omnidirectional antenna

2.4 dBi, with a downtilt angle of roughly 30 degrees

10 dBm

–88 dBm (@BLE)

Ports Specifications

Uplink:
1 x 10/100/1000BASE-T port, in compliance with IEEE 802.3af/802.3at standard (PoE/PoE+). Downlink:
4 x 10/100/1000BASE-T ports

1 x Micro USB console port (under the decorative cover)

1 x multi-color system status LED

1 x Reset button
Press the button for shorter than 2 seconds. Then the device restarts.
Press the button for longer than 3 seconds. Then the device restores to factory settings.

Power Supply and Consumption

Input power supply

The AP supports the following two power supply modes:
12 V DC/1 A power input over DC connector: The DC connector accepts 2.1 mm/5.5 mm center-positive circular plug. A DC power adapter needs to be purchased separately.
PoE input over the PoE-in port: The power source equipment (PSE) complies with the IEEE 802.3af standard. The IEEE 802.3at (PoE+) standard is backward compatible with the IEEE 802.3af (PoE) standard.
Note:
When powered by 802.3at (PoE+), the AP operates with the optimal performance. If both DC power and PoE are available, DC power is preferred.

Overall power consumption

Maximum power consumption: 10 W
DC powered: 10 W
PoE powered (802.3af): 10 W
Idle mode: 3.3 W

Environment and Reliability

Operating temperature: –10°C to +50°C (14°F to 122°F) Storage temperature: –40°C to+ 70°C (–40°F to +158°F)
Note: At an altitude in the range of 3,000–5,000 m (9,842.52–16,404.20 ft.), every time the altitude increases by 220 m (722 ft.), the Maximum temperature decreases by 1°C (1.8°F).

Operating humidity: 5% RH to 95% RH (non-condensing)
Storage humidity: 5% RH to 95% RH (non-condensing)

200,000 hours (22 years) at the operating temperature of 25°C (77°F)

Regulatory Compliance

IEC 62368-1
EN 62368-1

EN 55032
EN 55035
EN IEC 61000-3-2
EN 61000-3-3
EN 301 489-1
EN 301 489-3
EN 301 489-17

EN 300 328
EN 301 893
EN 300 440
EN IEC 62311
FCC Part 15

Applicable software version

RGOS11.9(6)W1B9 or later

WLAN

120

256
Note: The number of associated clients varies according to the environment.

16 (up to 8 BSSIDs per radio)

SSID hiding
Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN
attributes independently.
Remote intelligent perception technology (RIPT)
Intelligent client identification technology
Intelligent load balancing based on the STA quantity or traffic

SSID-based STA limiting
Radio-based STA limiting

STA/SSID/AP-based rate limiting

Layer 2 and Layer 3 roaming

Security and Authentication

Remote Authentication Dial-In User Service (RADIUS) PSK, web, 802.1X, WPA, WPA2, and WPA3 authentication
SMS authentication (used with the RG-WS series wireless access controller) MAB authentication (used with the RG-WS series wireless access controller)
WEP (64/128 bits), WPA-Personal, WPA-Enterprise, WPA2-Personal, WPA2-Enterprise, WPA3-Personal (WPA2/WPA3 transition mode), WPA3-Enterprise (CCMP), WPA3-OWE

Allowlist, static blocklist, and dynamic blocklist

Dynamic ACL assignment
ACL assignment based on time spans
ACL assignment (complete entry) based on MAC addresses
Execution of pre-configured ACLs (entry index) based on MAC addresses

Supported

Routing and Switching

Static IPv4 address and DHCP-assigned IPv4 address NAT ALG FTP and NAT ALG DNS

Multicast-to-unicast conversion

IPv6 addressing, Neighbor Discovery (ND), ICMPv6, IPv6 ping IPv6 DHCP client

IPv4/IPv6 static routing

PPPoE client
IPsec VPN, up to four IPsec tunnels

Management

Network management

Fault inspection and alarm Information statistics and logging SNMPv1/v2c/v3
NTP Server and NTP Client

Network management platform

Ruijie Cloud
Web-based management (Eweb)

User access management

Console, Telnet, SSH, SNMP and TFTP-based management

Fat/Fit/Cloud mode switchover

When the AP works in Fit mode, it can be switched to Fat mode through an AC.
When the AP works in Fat mode, it can be switched to Fit mode through the console port or Telnet. When the AP works in Cloud mode, it can be managed through Ruijie Cloud.

Ordering Information

802.11ax dual-radio wall plate wireless access point Up to four spatial streams
Data rate of up to 1.775 Gbps
Compliance with IEEE 802.11a/b/g/n/ac and 802.11ax standards Fat/Fit/Cloud mode switchover
IEEE 802.3af-compliant power supply and DC power supply
Note:
A PSE needs to be purchased separately.
A 12 V/1 A power adapter needs to be purchased separately.

(Optical) Mounting bracket for the US standard junction box. Each set contains 10 pieces.

Package Contents

RG-AP180 (including elegant white cover)

1

M4 x 40 mm cross recessed pan head screw

1

Quick Start Guide

1

Warranty Card

2