Fortinet FortiAP U432F

Specifications

Hardware

Hardware Type

Outdoor AP

Number of Radios

3 + 1 BLE

Number of Antennas

11

Antenna Type and Peak Gain

Dual band Dipole Omni Directional Peak Gain 5.5dBi for 2.4GHz and 7dBi for 5.0GHz

Frequency Bands (GHz)

2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850

Radio 1 Capabilities

2.4 GHz a/b/g/n (4×4 4stream) (64 QAM) or 5.0 GHz (high band) a/b/g/n/ac/ax (4×4 4 stream) 20/40/80/160 MHz (64/256/1024 QAM)

Radio 2 Capabilities

5.0 GHz a/b/g/n/ac/ax (4×4 4 stream) 20/40/80/160 MHz (64/256/1024 QAM)

Radio 3 Capabilities

2.4/5.0 GHz dual band b/g/n/ac (2×2 2 stream) 20/40 MHz (64 QAM)

Maximum Data Rate

Radio 1 up to 4,804 Mbps

Radio 2 up to 4,804 Mbps

Radio 3 up to 300 Mbps

Bluetooth Low Energy Radio

Bluetooth scanning and iBeacon advertisement @ 10 dBm max TX power

Interfaces

1x 100/1000/2500 Base-T RJ45(802.2bt PoE) , 1 x 10/100/1000 Base-T RJ45 (802.3af PSE OUT), 1x RS-232 RJ45 Serial Port

Power over Ethernet (PoE)

802.3bt PoE default (ships with Passive PoE injector
Powered by 802.3at PoE – Operate in 4×4 mode with reduced Tx power Radio1/R2 17dBm
This product only supports PSE functionality when it is powered by PoE injector that ships
with the product.

Simultaneous SSIDs

Up to 16 (14 if background scanning enabled)

EAP Type(s)

EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAPMSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST

User/Device Authentication

WPA™, WPA2™, and WPA3™ with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blocklist and allowlist

Maximum Tx Power (Conducted)

Radio 1 2.4 GHz 29 dBm / 794 mW (4 chains combined)* 5.0 GHz 28 dBm / 630 mW (4 chains combined)

Radio 2 5.0 GHz 26 dBm / 400 mW (2 chains combined)

Radio 3 2.4 GHz 26 dBm / 400 mW (2 chains combined) 5.0 GHz 24 dBm / 251 mW (2 chains combined)*

Kensington Lock

No

IEEE Standards

802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11w, 802.11ac, 802.1Q, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az, 802.11ax, 802.3bz

SSID Types Supported

Local-Bridge, Tunnel, and Mesh

Per Radio Client Capacity

Up to 512 clients per Radio1 and Radio2

Cellular Co-existence

Yes

LED Off Mode

No

Advanced 802.11 Features

OFDMA

Yes (UL and DL)

Spatial Reuse (BSS Coloring)

Yes

UL MU-MIMO 802.11ax mode

Yes

DL-MU-MIMO

Yes

Enhanced Target Wake Time (TWT)

Yes

ZeroWait DFS/Agile DFS

Yes

Wireless Monitoring Capabilities

Rogue Scan radio modes

Background, Dedicated

WIPS / WIDS radio modes

Background and Dedicated (recommended)

Packet Sniffer Mode

Yes

Spectrum Analyzer

Yes

Dimensions

Length x Width x Height

8.23 x 8.23 x 2.38 inches (209 x 209 x 60.5 mm)

Weight

0 lb 8 oz (0.232 kg)

Package (shipping) Weight

12 lb 9 oz (5.7 kg)

Accessories

Mounting Options

Wall/ Pole

Included Accessories

1-3. Wall/ Pole/ Sector Ant. bracket
4. POE adapter
5. Power cable – PIN060
6. Grounding cable
7. Mounting Kit (Pole straps; mounting bolts, screws; grounding screws)
8. External Ant.(2.4GHz; 5GHz; 2.4/5GHz)

Environment

Power Supply

802.3bt (ships with passive PoE injector with build in reset switch)

Power Consumption (Maximum)

32W max (without PSE) & 45W max (with PSE 12.99W)

Humidity

10–90% non condensing

Operating / Storage Temperature

22–140°F (-40 – 60°C) / -40–176°F (-40–80°C)

Directives

Low Voltage Directive • RoHS

UL2043 Plenum Material

No

Mean Time Between Failures

> 10 Years

IP Rating

IP67

Surge Protection Built In

Yes

Hit-less PoE Failover

N/A

Certifications

WiFi Alliance Certified

NO

DFS

CE

Warranty

Limited Lifetime Warranty

Yes