Fortinet FortiAP 433F

Specifications

Hardware

Hardware Type

Indoor AP

Number of Radios

3 + 1 BLE

Number of Antennas

5 External (RP-SMA) + 1 BLE Internal

Antenna Type and Peak Gain

Omni directional rubber duck antenna:

4 dBi for 2.4 GHz, 6 dBi for 5 GHz

Frequency Bands (GHz)

2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850

Radio 1 Capabilities

Frequency band: 2.4GHz

Channel width: 20/40MHz

Modulation: BPSK, QPSK, 64/256/1024 QAM

MIMO Chains: 4×4 Service

Radio 2 Capabilities

Frequency Band: 5.0 GHz
Channel width: 4×4 20/40/80MHz and 2×2 160MHz
Contiguous Modulation: BPSK, QPSK, QAM64, QAM256, and QAM1024

Mimo chains: 4×4 service

Radio 3 Capabilities

Frequency band: 2.4/5.0 GHz MIMO chains: 1×1 frequency scanning

Maximum Data Rate

Radio 1: up to 1147 Mbps

Radio 2: up to 2402 Mbps

Radio 3: scan only

Bluetooth Low Energy Radio

Bluetooth scanning and iBeacon advertisement @ 6 dBm max TX power

Interfaces

1x 100/1000/2500 Base-T RJ45,
1 x 10/100/1000 Base-T RJ45,
1x Type A USB, 1x RS-232 RJ45 Serial Port

Power over Ethernet (PoE)

802.3at PoE default
1 port powered by 802.3at or 2 ports powered by 802.3af
– Full System functionality + USB support 1 port is connected to 802.3af – No USB support, Operate
in 2×2 mode with reduced power R1/R2 17dBm(Tx power)

Simultaneous SSIDs

Up to 16 (14 if background scanning enabled)

EAP Type(s)

EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST

User/Device Authentication

WPA™, WPA2™, and WPA3™ with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blocklist and allowlist

Maximum Tx Power (Conducted)

Radio 1: 2.4 GHz 24 dBm / 251 mW (4 chains combined)*

Radio 2: 5 GHz 23 dBm / 200 mW (4 chains combined)*

Radio 3: NA

Kensington Lock

Yes

IEEE Standards

802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i,802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11w,

SSID Types Supported

Local-Bridge, Tunnel, and Mesh

Per Radio Client Capacity

512 clients per radio (Radio1 and Radio2)

Cellular Co-existence

Yes

Reset Button

Yes

LED Off Mode

Yes

Advanced 802.11 Features

OFDMA

Yes (UL and DL)

Spatial Reuse (BSS Coloring)

Yes

UL MU-MIMO 802.11ax mode

Yes

DL-MU-MIMO

Yes

Enhanced Target Wake Time (TWT)

Yes

ZeroWait DFS/Agile DFS

No

Wireless Monitoring Capabilities

Rogue Scan radio modes

Background, Dedicated

WIPS / WIDS radio modes

Background, Dedicated (recommended)

Packet Sniffer Mode

Yes

Spectrum Analyzer

Yes

Dimensions

Length x Width x Height

8.27 x 8.27 x 2.22 inches (210 x 210 x 56.5 mm)

Weight

2.19 lbs (0.995 kg)

Accessories

Mounting Options

Ceiling, T-Rail, and Wall

Included Accessories

Mount kit for Ceiling, T-Rail and Wall. 5 RP-SMA Male dual-band dipole antenna

Environment

Power Supply

SP-FAP400-PA-XX or GPI-130

Power Consumption (Maximum)

24.5 W

Humidity

5% – 90% non condensing

Operating / Storage Temperature

32–113°F (0–45°C) / -31–-94°F (-35–70°C)

Directives

Low Voltage Directive • RoHS

UL2043 Plenum Material

No

Mean Time Between Failures

> 10 Years

Surge Protection Built In

Yes

Hit-less PoE Failover

Yes

Certifications

WiFi Alliance Certified

Yes

DFS

FCC, IC, CE, Japan, Korea, Taiwan

Warranty

Limited Lifetime Warranty

Yes