Aruba 565 Outdoor Access Points

Specifications

AP-565

Built in Omni Directional Antennas

5 GHz Antennas 5.4 dBi

2.4 GHz Antennas 3.2 dBi

BLE/802.15.4 Antennas 3.3d Bi

WI-FI RADIO SPECIFICATIONS

AP type: Outdoor Hardened, Wi-Fi 6 dual radio, 5 GHz 2×2 MIMO and 2.4 GHz 2×2 MIMO

2.4GHz radio: Two spatial stream Single User (SU) MIMO for up to 574 Mbps (287 Mbps) wireless data rate with individual 2SS HE40 (HE20) 802.11ax client devices or with two 1SS HE40 (HE20) 802.11ax MU-MIMO capable client devices simultaneously.

5GHz radio: Two spatial stream Single User (SU) MIMO for up to 1.2 Gbps wireless data rate with individual 2SS HE80 802.11ax client devices, or with two 1SS HE80 802.11ax MU-MIMO capable client devices simultaneously

Up to 256 associated client devices per radio

Up to 16 BSSIDs per radio

Supported frequency bands (country-specific restrictions apply):

2.400 to 2.4835 GHz  

5.150 to 5.250 GHz    

5.250 to 5.350 GHz    

5.470 to 5.725 GHz  

5.725 to 5.850 GHz    

5.850 to 5.925 GHz

5.825 to 5.875 GHz

Available bands and channels: Dependent on configured regulatory domain (country).

Dynamic frequency selection (DFS) optimizes the use of available RF spectrum

Supported radio technologies:

802.11b: Direct-sequence spread-spectrum (DSSS)

802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)

802.11ax: Orthogonal frequency-division multiple access (OFDMA) with up to 16 resource units (RU)

Supported modulation types:

802.11b: BPSK, QPSK, CCK

802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM (proprietary extension)

802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM (proprietary extension)

802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM and 1024-QAM

802.11n high-throughput (HT) support: HT20/40

802.11ac very high throughput (VHT) support: VHT 20/40/80

802.11ax high efficiency (HE) support: HE20/40/80

Supported data rates (Mbps) :

802.11b: 1, 2, 5.5, 11

802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40), 400 with 256-QAM

802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT80), 1,083 with 1024-QAM

802.11ax (2.4GHz): 3.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)

802.11n/ac packet aggregation: A-MPDU, A-MSDU

Transmit power: Configurable in increments of 0.5 dBm

Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):

2.4 GHz band: +23 dBm per chain, +26 dBm aggregate (2×2)

5 GHz band: +23 dBm per chain, +26 dBm aggregate (2×2)

Note: conducted transmit power levels exclude antenna gain.

Maximum EIRP (limited by local regulatory requirements):

2.4 GHz band:  29.2 dBm EIRP

5 GHz band:    31.4 dBm EIRP

Advanced Cellular Coexistence (ACC) minimizes the impact of interference from cellular networks

Maximum ratio combining (MRC) for improved receiver performance

Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance

Space-time block coding (STBC) for increased range and improved reception

Low-density parity check (LDPC) for high-efficiency error correction and increased throughput

Transmit beam-forming (TxBF) for increased signal reliability and range

Short guard interval for 20-MHz, 40-MHz, and 80-MHz

ADDITIONAL INTERFACES

E0: 10/100/1000BASE-T (RJ-45)

Auto-sensing link speed and MDI/MDX

PoE-PD: 48Vdc (nominal) 802.3at/bt (Class 3 or higher)

802.3az Energy Efficient Ethernet (EEE)

Bluetooth 5 and 802.15.4 radio

2.4 GHz

Bluetooth 5: up to 8 dBm transmit power and -95 dBm receive sensitivity

Zigbee: up to 8 dBm transmit power and -97 dBm receive sensitivity

Up to 4 dBm transmit power (class 2) and -91 dBm receive sensitivity

Link Aggregation (LACP) support between both network ports for redundancy and increased capacity

Bluetooth 5 and 802.15.4 radio

2.4 GHz

Bluetooth 5: up to 8dBm transmit power and -95dBm receive sensitivity

Zigbee: up to 8 dBm transmit power and -97dBm receive sensitivity

Up to 4dBm transmit power (class 2) and -91 dBm receive sensitivity

Visual indicator (multi-color LED): For system and radio status

Reset button: Factory reset (during device power up)

USB-C console interface

POWER SOURCES AND POWER CONSUMPTION

Maximum (worst-case) power consumption: 15.6W

Maximum (worst case) power consumption in idle mode: 4.2W

Maximum (worst case) power consumption in deep-sleep mode: 1.7

Power sources sold separately

Power over Ethernet (PoE+): 802.3at-compliant

When powered by 1x 802.3at, there are no restrictions

When powered by 1x 802.3af with IPM enabled, the AP will start up in unrestricted mode, but may dynamically apply restrictions depending on the POE budget and actual power. The feature restrictions can be programmed.

When powered by 1x 802.3af with IPM disabled, the AP will lower the 2.4Ghz radio to 1×1:1

MOUNTING

AP-270-MNT-V1
AP-270-MNT-V2
AP-270-MNT-H1
AP-270-MNT-H2
AP-270-MNT-H3

MECHANICAL SPECIFICATIONS

Dimensions/weight (excluding mount):

16.5 cm (W) x 16.5 cm (D) x 11 cm (H)

6.5″ (W) x 6.5″ (D) x 4.3″ (H)

1.03 kg/2.27 lbs

ENVIRONMENTAL

Operating conditions

Temperature: -40°C to +55°C (-40°F to +140°F) with full solar loading

Humidity: 5% to 95% non-condensing internal

Rated for operation in all weather conditions

Storage and transportation:

Temperature: -40° C to +70° C (-40°F to +158°F)

Operating Altitude: 3,000 m

Water and Dust

IP66/67

Salt Tolerance

Tested to ASTM B117-07A Salt Spray 200hrs

Wind Survival: Up to 165 Mph

Shock and Vibration ETSI 300-19-2-4

REGULATORY

FCC/ISED

CE Marked

RED Directive 2014/53/EU

EMC Directive 2014/30/EU

Low Voltage Directive 2014/35/EU

UL/IEC/EN 60950

EN 60601-1-1, EN60601-1-2

Railway Certs:

EN 50155:2017 – Railway Applications

EN 50121-1:2017 – Railway EMC

EN 50121-3-2 – Railway EMC

EN 50121-4:2016 – Railway Immunity

IEC 61373 ed2:2008 – Railway Shock and Vibration

For more country-specific regulatory information and approvals, please see your Aruba representative.

REGULATORY MODEL NUMBER

AP-565: APEX0565

CERTIFICATIONS

CB Scheme Safety, cTUVus

UL2043 plenum rating

Wi-Fi Alliance certified 802.11a/b/g/n/

Wi-Fi Alliance certified Wi-Fi 6 (802.11ax)

Wi-Fi CERTIFIED™ ac (with wave 2 features)

Passpoint® (Release 2) with ArubaOS and Instant 8.3+

WARRANTY

Limited Lifetime Warranty

Minimum Software Versions

ArubaOS & Aruba InstantOS 8.7.1.0